Samsung HT-DB1650 Settingthe Test Tone, ‘Audio’ and then, Press TEST TONE button, Press Cursor

Setting the Test Tone

1		2	Press Cursor	3	Press Cursor button
	Press MENU button.		button to move to		to move to ‘TEST
			‘Audio’ and then		TONE’ and then press
			press ENTER button.		ENTER button.

• The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in that order. If the button is pressed again at this time, the test tone will stop.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

SETUP

When manually testing using the TEST TONE button

Press TEST TONE button.

•Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode.

•Use this function to check that each speaker is correctly connected and that there is no problem.

To end the test tone, press TEST TONE button.

L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
R: Front Speaker (R)	LS: Rear Speaker (L)	RS: Rear Speaker (R)

Multi-Channel Pro Logic Mode

Start

42