Press Cursor 
button
3to move to ‘DELAY TIME’ and then press ENTER button.
Press Cursor 
, 
,
4
, 
buttons to move to the desired speaker and then press ENTER button.
Press Cursor
,
5 to set the Delay
time
•You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.
SETUP
•Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc | Delay Time |
|
|
50 | 1.3 ms |
100 | 2.6 ms |
150 | 3.9 ms |
200 | 5.3 ms |
|
|
•Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Ds and Dc | Delay Time |
200 | 5.3 ms |
400 | 10.6 ms |
600 | 15.9 ms |
Ideal CENTER
SPEAKER placement
Ideal
SURROUND SPEAKER placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER44
Ds: The distance from SURROUND SPEAKER
