already programmed into that memory location appear.
4.If you select SINGLE LOC, go to step
5.Otherwise, repeatedly press e or d to select the memory location where you want to store a FIPS code.
5.To add a FIPS code or change the displayed FIPS code, press g. The FIPS code’s first digit flashes.
6.Repeatedly press g or fto move the cursor backward or forward to
change the digit. Then repeatedly press e or d until the desired digit appears. Then press g. Ô
7.Repeat Step 6 for each digit you want to change or add. Press g when the last digit flashes. The radio beeps and saves the FIPS code. If the code is not in the weatheradio’s database, NEW CODE? appears. Press gagain to save the FIPS code.
8.If you select MULTIPLE LOC in step 4, the FIPS code stored in the next memory location appears. Repeat
5-7 for each additional FIPS code.
Ô NOTE Ô
To erase the FIPS code, press e or d to select – for the first digit and press g to confirm.
Programming the Weatheradio‚
17
