IF YOU HAVE PROBLEMS
SCANNING THE CODES
If the Pocket Remote does not control your re-
You can try all the codes for the brand of your de- vice, or you can follow these steps to search the Pocket Remote’s entire library.
1.Manually turn on the device you are trying to set up.
2.Aim the Pocket Remote at the device.
3.Press the device key, then hold down P until the red light blinks twice. Then press the CHANt key three times. The red light blinks twice again.
4.Repeatedly press PWR then the device key for the type of device (TV, VCR, or CBL) until the device responds.
Each time you press the device key, the Pocket Remote advances to the next manu- facturer’s code in the list.
5.When the device responds, press P to lock in the manufacturer’s code. If necessary, repeat these steps for each device key.
CHECKING THE CURRENT CODES
To determine which
1.Press the appropriate device key, then hold down P until the red light blinks twice.
2.Press the key equivalents to enter 4 4 3. The red light blinks twice again.
Need help? Call
31
