Radio Shack 1500 owner manual Operation, Receiving a Call, Reviewing Call Records

43-976.fm Page 13 Monday, August 16, 1999 4:38 PM

OPERATION

RECEIVING A CALL

When you receive a call, the telephone automatically displays infor- mation about the caller and stores the information in Caller ID memory, if you subscribe to the service. The tele- phone can store up to 19 phone num- ber, or up to 7 name and phone number records.

Note: The flashing --changes to steady and the current time stops run- ning while the telephone records and displays the time of an incoming call. After about 30 seconds, --flashes again when the display shows the up- dated current time.

REVIEWING CALL

RECORDS

Press REVIEW once. The display shows the number of calls you received.

Press REVIEW again, NO--01ap- pears briefly, then the first line of the caller’s information appears.

To display all the caller’s available in- formation, press READ. Each time you press READ, the display cycles through the caller’s information in this order:

Name (or other information)

Phone number

Time of call

To display the next record, press REVIEW again.

When you reach the end of the call records, END OF LIST appears.

Notes:

•If you have not received any calls, NO CALLS appears when you press REVIEW.

•If you do not press any button within 30 seconds while you are reviewing call records, the tele- phone automatically returns to the time display.

•If the caller’s name or the phone number is more than 11 charac-

ters, appears on the display. Press READ to see the rest of the name or number.

•When the Caller ID Memory is full and a new call arrives, the tele- phone automatically deletes the oldest call record to store the new call information.

13