3.To have the phone tilt slightly for- ward, insert the tabs on the nar- row end of the stand into the matching slots near the bottom of the phone. Then snap the stand into place by pressing in the two tabs toward the top of the phone.
4. Place the phone on a desk.
Wall-Plate Mounting
1.Plug one end of the supplied short modular phone cord into the TEL. LINE jack on the phone.
8
2.Route the cord through the groove on the back of the phone.
3.Insert the tabs on the narrow end of the stand into the matching slots near the top of the phone, making sure the cord is routed through the opening in the stand. Then snap the stand into place by pressing in the two tabs toward the bottom of the phone.
4.Plug the other end of the supplied short modular phone cord into the modular phone jack in the wall plate.
