5.Align the phone stand’s keyhole slots with the studs on the wall plate and slide the phone down until it snaps into place.
Direct Wall Mounting
You can mount the phone directly on the wall using two screws (not sup- plied).
Note: Make sure the screw’s heads fit the phone stand’s keyhole slots.
1.Drill two holes, one above the other, 31/4 inches apart, then thread the screws into the holes until the heads extend about 1/8 inch from the wall.
2.Plug one end of the supplied long modular phone cord into the TEL. LINE jack on the phone.
3.Route the cord through the groove on the back of the phone.
4.Insert the tabs on the narrow end of the stand into the matching slots near the top of the phone, making sure the cord is routed through the opening in the stand. Then snap the stand into place by pressing in the two tabs toward the bottom of the phone.
9
