Battery Pack
To connect the battery pack, line up the slots on the battery pack with the posts on the back of the keypad. Press down and slide the battery pack forward until the latch clicks.
To | charge | the | battery | Battery |
| |
pack, place the keypad in | Charging | Antenna | ||||
the | base’s | front | charging | Slot |
| |
|
| |||||
slot. The CHARGE indica- | CHARGE |
| ||||
tor at the front of the unit |
|
| ||||
lights. |
|
| Keypad | L1 | ||
|
|
|
| Charging |
| |
To charge the spare bat- | Slot | L2 | ||||
| ||||||
tery | pack, place | it in the | CHARGE | PAGE | ||
rear charging slot with its | ||||||
|
| |||||
latch end facing down and
its contacts toward the rear of the base. The CHARGE indicator between the two slots lights.
Notes:
•Recharge the battery pack anytime the LOW BATT indica- tor flashes, or if the keypad beeps while you are on the phone.
•When you first use the phone after charging or recharging the battery pack, the phone might not work. Return the key- pad to the base for about 5 seconds to reset the security
•About once a month, fully discharge the battery pack by keeping the phone off the base until the LOW BATT indica- tor flashes, or if the keypad beeps while you are on the
10 |
| Preparation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
