SETTING RING/VIBRATE/DUAL
You can adjust the keypad’s ringer mode from RING VIB to RING/VIB.
With the ringer set to VIB, the phone vibrates instead of ringing when receiving call.
With the ringer set to RING/VIB, the phone rings and vibrates when receiving call.
Note: The keypad does not vibrate when it is on the base.
TURNING THE RINGERS ON OR OFF
The keypad’s ringer L1 RINGER OFF/ON and L2 RINGER OFF/ON on the base control. To have the phone ring when a call comes in, set RINGER on the desired line to ON. To keep the phone from ringing, set RINGER on the desired line to OFF.
With RINGER set to OFF, the phone does not ring for incoming calls, but you can still make outgoing calls. If you hear an exten- sion telephone ring, you can answer the incoming call on this phone. The L1 or L2 indicator flashes until you answer the call.
Note: If RINGER is set to OFF and RING VIB RING/VIB is set to VIB or RING/VIB, the keypad still vibrates when a call comes in.
SETTING THE DIALING MODE
Set TONE/PULSE on the side of the base for the type of service you have. If you are not sure which type you have, do this sim- ple test after charging the battery pack.
14 |
| Preparation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
