When you receive a call on a line, the light for that line flashes and the phone rings or vibrates (if you set the ringer for that line to ON). Press the button for the ringing line to answer the call. The indicator for that line lights.
Notes:
•When you are using one line and a call comes on the other line, the phone beeps or vibrates and the indicator of that line flashes. You can hold the line you are using and answer the call. (See “Using Hold” on Page 17.)
•When you press a button, a single tone indicates that the phone has accepted the command. Three tones indicate that you pressed a button in error or there is severe inter- ference. (See “Changing Channels” on Page 18.)
•If interference is severe, the keypad might lose communi- cation with the base and the call might disconnect. If this happens, return the keypad to the base for about 5 sec- onds to reset the security
ADJUSTING THE HEADSET’S VOLUME
To adjust the headset’s volume, repeatedly press VOLUME 8 or VOLUME 9 during a call until the sound level is comfortable. You can set the headset’s volume to one of four levels, and it remains set even after you hang up.
Note: The keypad sounds 3 beeps when you reach the lowest or highest listening level.
16 |
| Operation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
