1.Set TONE/PULSE to TONE.
2.Press L1 or L2 so the indicator for that line lights and listen for a dial tone.
3.Press any number other than 0 or 1.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either.
If the dial tone stops, you have
4.Press L1 or L2.
5.If you have tone service, leave TONE/PULSE set to TONE. If you have pulse service, set TONE/PULSE to PULSE.
Note: Return the keypad to the base for at least 5 seconds after you set the service type.
ˆOperation
Before you use the phone, put the headset on and adjust it as needed (see “Connecting and Adjusting the Headset” on Page 13).
To make a call, select a line by pressing L1 or L2. You hear a dial tone and the indicator for that line lights. Dial the number you want to call.
Operation | 15 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
