SRCH — appears during service bank and direct frequency searches.
SCAN — appears when you scan channels.
MAN — appears when you manually select a channel.
PGM — appears while you program frequencies into the scanner's channels.
PRI — appears when you turn on the priority feature.
DLY — appears when you program a 2- second delay.
Error — appears when you make an entry error.
-dUPL-(Duplicate) — appears when you try to store a frequency that is already stored in another channel.
-d-— appears during a direct frequency search.
-b-— appears during a service bank frequency search.
Ch-FULL— appears when you try to enter a frequency during a search when all channels are full.
FL-out— appears when you start direct search from a locked-out frequency.
FLo -FULL— appears when you try to lockout a frequency during a search when 50 frequencies are already locked out.
L-r— appears when you review the lockout frequencies.
dEFAULt — appears when you unlock all the locked-out frequencies from the service bank.
FLo ALL-CL— appears when you remove all the locked out frequencies during a service bank/direct search.
P — appears when the scanner is tuned to the priority channel.
ALErt — appears when the scanner is watching the WX alert tone.
WIrEd — appears when you turn on the wired programming mode.
StArt — appears when the scanner starts wired programming.
C-Err— appears when the scanner receives a check sum error during wired programming.
D-Err— appears when the scanner finds a data error while using wired programming.
End — appears when the scanner finishes wired programming.
oFF tonE — appears when you set the key tone off.
on tonE — appears when you set the key tone on.
UNDERSTANDING SERVICE BANKS/BANKS
Channel Storage Banks
To make it easier to identify and select the channels you want to listen to, channels are divided into 10 banks of 20 channels each. Use each channel-storage bank to group frequencies, such as those used by the police department, fire department, ambulance services, or aircraft (see “Guide to the Action Bands” on Page 23). For example, the police department might use four frequencies, one for each side of town. You could program the police frequencies starting with Channel 1 (the first channel in bank 1) and program the fire department frequencies starting with Channel 21 (the first channel in bank 2).
