Radio Shack 22CH GMRS/FRS OPERATION, SELECTING A CHANNEL, SCAN, BUSY

2.Insert the supplied adapter’s barrel plug into the DC 6V 500mA jack on the back of the radio.

3.Route the adapter’s cord into the strain relief groove on the back of the radio, then plug the adapter into a standard AC outlet.

4.Place the radio’s two keyhole slots over the screws and slide the unit down to secure it.

5.Raise the antenna to a vertical position.

OPERATION

Rotate VOLUME to turn on/off the radio and to adjust the volume.

SELECTING A CHANNEL

To manually select a channel, press e/SCAN or d/CALL. The selected channel number appears. See “Transmit Frequencies and Power” on Page 8.

To scan through the channels, hold down e/SCAN until SCAN appears. The radio automatically scans through the channels and pauses on each active channel. BUSY appears when a call is being received. Press any button except e/SCAN or d/CALL to stop scanning.

Operation

7