USING QUIET CODES

Quiet Codes let you talk and listen to other radios set to the same channel and CTCSS (quiet code). This is similar to having a sub-channel within a channel, giving you greater communication flexibility. When you set a quiet code (there are 38 codes to choose from) and turn on this feature, you can communicate with any user who has a radio set to the same channel and quiet code.

1.Hold down QUIET until the quiet code flashes.

2.Repeatedly press e/SCAN or

d/CALL until you see the desired quiet code. (See “Quiet Codes” on

Page 10 for a complete list of quiet codes.) Ô

3.Press QUIET to store the quiet code.

4.To turn off the quiet code feature, press QUIET. The quiet code disappears.

Ô NOTE Ô

•To quickly find a

quiet code, hold down d/CALL until

the desired quiet

code appears, then release d/CALL.

•We recommend that you select a quiet code from the range 7–30. If you select a code below or above that range, you must wait 1 to 2 seconds after holding down TALK before you start talking.

9