Limited Two-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for two (2) years from the date of purchase from RadioShack company- owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack

MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PAR- TICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED

3.Using a wire stripper, remove about 1/4 inch of insulation from each wire. Then twist the ends of each wire.

4.Connect the marked wire to a red speaker terminal by pressing the release tab, inserting the wire into the hole, and then releasing the tab. Repeat this

procedure to connect the unmarked wire to the black terminal.

5.Connect the marked wire coming from the speaker to the left channel of the receiver's positive (+) terminal. Then connect the unmarked wire to the left channel of the amplifier's negative (–) terminal.

WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE- SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN- CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF Ra- dioShack HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack

/1706+0)"6*'"52'#-'4

1.Remove the grille to expose the mounting screws.

2.Be sure the mounting tabs are turned in, allowing the speaker to fit into the hole. Then insert the speaker into the mounting hole.

3.Use the four screws to tighten the mounting tabs to the wall or ceiling. Be careful not to overtighten the screws.

4. Replace the grille.

Mounting

Tabs

To remove the speaker from the wall or ceiling, loosen the screws only far enough to remove the speaker. This will prevent loss of the mounting tabs.

store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product re- pair without charge for parts and labor; (b) replace the product with one of the same or similar design; or

(c)refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or recondi- tioned parts and products may be used in the perfor- mance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, acci- dent, misuse, improper or abnormal usage, failure to follow instructions, improper installation or mainte- nance, alteration, lightning or other incidence of ex- cess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;

(d)cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, in- stallation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street,

6th Floor, Fort Worth, TX 76102

12/99

52'%+(+%#6+105

Resonance Frequency

................................................................................................................ 60 Hz ±20%

Frequency Response

35 Hz through 22 kHz

Power Rating

40 Watts RMS, 80 Watts Max.

Impedance (nominal)

8 Ohms

Sensitivity

85 dB ±3 dB

Voice Coil

1 in. (25 mm)

Voice Coil (Tweeter)

1 in. (25 mm)

Magnet Size (Woofer)

11 oz

The plastic enclosure for this speaker meets UL 94 requirements for flammability.

Specifications are typical; individual units may vary. Specifications are subject to change or improvement without notice.

RadioShack Corporation

40-4093

03A02

Fort Worth, Texas 76102

Printed in China

Page 2
Image 2
Radio Shack 40-4093 owner manual 1706+06*52#-4, 52%++%#6+105

40-4093 specifications

The Radio Shack 40-4093 is a versatile and compact 16-channel receiver designed for enthusiasts and professionals alike. This device is capable of capturing a wide array of signals, making it a popular choice for hobbyists and individuals interested in the world of radio communication. With its lightweight design, it becomes an easy, portable solution for those who require mobility in their monitoring activities.

One of the main features of the 40-4093 is its ability to operate across multiple frequency bands. This includes VHF, UHF, and other popular spectrums, allowing users to listen in on a variety of transmissions. The receiver boasts a frequency range that typically spans from 30 MHz to 1 GHz, a broad spectrum allowing for diverse applications, from amateur radio to more specialized signal monitoring.

In terms of technology, the 40-4093 utilizes advanced digital signal processing (DSP) to enhance audio clarity and reduce interference. This technology improves the listening experience by filtering out unwanted noise and providing clear reception of signals, which is critical when monitoring busy channels. The incorporation of DSP not only enhances signal quality but also extends battery life, making it a reliable tool for extended use.

The device features a user-friendly interface with a backlit LCD display that provides real-time information on the frequency, signal strength, and battery status. This display allows users to quickly identify and switch between channels, making the operation efficient even in low light conditions.

Another noteworthy characteristic is the built-in memory function, which enables users to program and store their favorite channels for quick access. This feature is particularly beneficial for those who frequently monitor specific frequencies, as it eliminates the need to manually tune each time.

Additionally, the Radio Shack 40-4093 is compatible with a variety of antennas, allowing users to customize their setup for optimal reception. Whether it’s a simple wire antenna or a more complex outdoor model, the flexibility in antenna choice ensures that users can tailor their listening experience to suit their unique environment and requirements.

Overall, the Radio Shack 40-4093 stands out as a reliable and multifunctional receiver that caters to a broad range of users. Its combination of advanced technology, user-centric features, and adaptability makes it an essential tool for anyone interested in exploring the dynamic world of radio communications.