Problem | Suggestions | |
|
| |
|
| |
The handset does not | Move the handset closer to the base. | |
ring or receive a page. |
| |
Lift base’s antenna to a vertical position. | ||
| ||
|
| |
| Be sure the battery pack in the handset is connected and charged. | |
|
| |
| Move the base away from other electrical devices. | |
|
| |
You have an incoming | Let the phone ring twice before you answer so the system has time to record | |
call, but do not receive | the Caller ID information. | |
any Caller ID informa- |
| |
Check that the system is correctly and securely connected. | ||
tion. | ||
| ||
Check with your phone company to verify that your Caller ID service is active. | ||
| ||
|
|
If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance.
CARE
Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in normal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the telephone’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your telephone is not performing as it should, take it to your local RadioShack store for assistance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your telephone until you have resolved the problem.
Troubleshooting | 19 |
