Before using your phone, you must install the battery pack, and then charge it for about
1.Press down and slide the battery compartment cover off.
2. Plug the battery pack’s connector into the socket
in the compartment (the connector fits only one way), then place the battery pack in
the compartment. MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL appears.
3.Replace the cover.
To charge the battery pack, place the handset on the charger. The CHARGE indicator on the charging cradle lights. Proceed to “Registering the Handset” on page 9.
Important: Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the charger.
Recharge the battery pack when LOW BATTERY appears.
•About once a month, use a damp cloth to clean the
charging contacts on the handset.
•If the battery pack becomes weak during a call, the handset beeps and LOW BATTERY appears. When this happens, you cannot make a call until you recharge the battery pack.
•If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.)
