Setup
Date and Time
If you subscribe to caller ID service, the date and time is set automatically with the next incoming call. If you do not have caller ID service, you can set the date and time manually.
1.Press PROG.
2.Press 
or 
until DATE/TIME is displayed. Press SELECT.
3.When the month is flashing, press 
or 
until the screen displays the correct month and then press SELECT or PROG.
4.When the date is flashing, press 
or 
until the screen displays the correct date and then press SELECT or PROG.
5.When the hour is flashing, press 
or 
until the screen displays the correct hour and then press SELECT or PROG.
6.When the minute is flashing, press 
or 
until the screen displays the correct minute and then press SELECT or PROG.
7. When AM or PM is flashing, press 
or 
to choose between AM or PM and then press SELECT or PROG. You will hear a confirmation tone.
nNote: When there is a power failure, the time may need to be reset.
Ringer
You can select from different ringers.
1.Press PROG.
2.Press 
or 
until the screen displays RINGER: and the current setting.
3.Press SELECT. The current setting flashes, and you will hear a sample of the ringer.
4. Press 
or 
to select RINGER: 1, 2, 3, or 4. You will hear a sample of each ring tone.
5.Press SELECT or PROG to confirm. You will hear a confirmation tone.
10
