Setup
Battery Installation and Charging
Install the battery as shown below. The battery may have enough charge for short calls. For best performance, charge the battery for at least 16 hours before first use. Completely charge and drain the battery two or three times every three months afterwards. When the battery power is low, LOW BATTERY is displayed and 
flashes on the handset screen.
1.Insert the plug of the battery as indicated. Make sure it is plugged securely and matches the
2.Place the battery with the label THIS SIDE UP facing up, and the wires inside the battery compartment.
3.Align the battery compartment cover flat against the battery compartment, then slide it upwards until it clicks into place.
4.Charge the handset by placing it in the telephone base. The handset charge light is on when charging.
nNote: If the handset will not be used for a long period of time, remove the battery to prevent possible leakage.
Match color code label
Black wire
Red wire
