Installation Instructions38
Installation Instructions
1Attention: The new appliance may only be installed and connected by a registered ex-
pert.
Please comply with this. If you do not, any damage resulting is not covered by the war-
ranty.
1Safety information for the installer
•The electrical installation is to be set up so that the appliance can be isolated from the
mains with a minimum 3mm all-pole contact separation.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be taken
out of the holder), RCD’s and contactors.
•Anti-shock protection must be provided by the installation.
•The built-in unit must meet the stability requirements of DIN68930.
•Built-in ovens and built-in cooking surfaces are fitted with special connection sys-
tems. For safety reasons, they must only be combined with appliances from the same
manufacturer.