Wall Bracket Installation
Your telephone base comes with the wall bracket installed, ready for desktop use. You may also mount your telephone onto a standard telephone wall plate.
Wall bracket installation:
To prepare the telephone base for wall mounting, you need to remove the bracket if it is currently attached for desktop use. Press the tabs located on the legs of the bracket to loosen, then lift the bracket up and away from the telephone base.
1.Insert the lower tabs of the wall bracket into the lower grooves in the telephone base, then snap the upper tabs of the wall bracket into place.
2.Mount the telephone base on the wall by positioning it so the mounting studs fit into the holes on the telephone base and wall bracket. Slide the telephone base down on the mounting studs until it locks into place.
3.To remove the bracket, press both upper portion tabs firmly and pull the bracket downward until it releases from the grooves.
Wall bracket | Wall bracket in |
| correct mounting |
| position |
2
1
Setup
