Lexicon RV-8 manual Product Registration Installation Considerations

RV-8 Getting Started

PRODUCT REGISTRATION

Please register the RV-8 Receiver within 15 days of purchase. Register online at www.lexicon.com or complete and return the product registration card attached to the back cover of this user guide. Retain the sales receipt as proof of warranty coverage.

INSTALLATION CONSIDERATIONS

The RV-8 requires special care during installation to ensure optimal performance. Pay particular attention to instructions below and to other precautions that appear throughout this user guide.

DO install the RV-8 on a solid, flat, level surface such as a table or shelf. The RV-8 can also be installed in a standard 19-inch equipment rack using an optional rack-mount kit available from an authorized Lexicon dealer.

DO select a dry, well-ventilated location out of direct sunlight.

DO NOT expose the RV-8 to high temperatures, humidity, steam, smoke, dampness or excessive dust. Avoid installing the RV-8 near radiators or stacking the RV-8 over other heat-producing equipment such as a power amplifier.

DO NOT install the RV-8 near unshielded TV or FM antennas, cable TV decoders, or other RF-emitting devices that might cause interference.

DO NOT place the RV-8 on a thick rug or carpet, or cover the RV-8 with a cloth, as this might prevent proper cooling.

DO NOT place the RV-8 on a windowsill or any location exposed to direct sunlight.

DO NOT obstruct the front-panel IR receiver window. The remote control must be in line of sight with the IR receiver for proper operation.

DO NOT install the RV-8 on a surface that is unstable or unable to support all four feet.

CAUTION!

Before moving the RV-8, power the unit off using the rear- panel power switch and unplug the power cord from the wall outlet.

1-5