Lexicon RV-8 manual ON-SCREEN Display Setup, Parameter Default Setting Possible Settings

Setup Lexicon

ON-SCREEN DISPLAY SETUP

SETUP DISPLAYS ON-SCREEN DISPLAY

Opens the ON-SCREEN DISPLAY menu, which is used to customize the on-screen display.

MAIN MENU

MODE ADJUST AUDIO CONTROLS TUNER PRESETS

SETUP

SETUP

INPUTS

SPEAKERS

I/O CONFIG

DISPLAYS

VOLUME CONTROLS TRIGGER

TUNER SETUP

LOCK OPTIONS LIVE! CALIBRATION POWER MANAGEMENT

DISPLAY SETUP

ON-SCREEN DISPLAY

FRONT PANEL DISPLAY
A/V SYNC DELAY	OFF
CUSTOM NAME	OFF
EDIT CUSTOM NAME

ON-SCREEN DISPLAY

STATUS	2 SECONDS
POSITION	TOP
FORMAT	NTSC
BACKGROUND	ON
ON
OFF

ALWAYS ON

2SECONDS ALWAYS OFF

TOP

CENTER

BOTTOM

SECAM

PAL

NTSC

Parameter	Default Setting	Possible Settings
STATUS	2 SECONDS	ALWAYS ON, 2 SECONDS,
		ALWAYS OFF
POSITION	TOP	TOP, CENTER, BOTTOM
FORMAT	NTSC	SECAM, PAL, NTSC
BACKGROUND	ON	ON, OFF

STATUS			ALWAYS ON, 2 SECONDS, ALWAYS OFF
	SETUP	DISPLAYS	ON-SCREEN DISPLAY	STATUS

Activates and deactivates the on-screen display sent to the Main Zone video output connector. When set to ALWAYS ON, the on-screen display remains on at all times. When set to 2 SECONDS, the on-screen display appears for 2 seconds whenever the input source changes or the RV-8 receives a command. When set to ALWAYS OFF, the on-screen display remains off at all times. It will not reappear until the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS ON or 2 SECONDS.

Note:

When the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS OFF, the on-screen display immediately disappears. Use the front-panel display as a guide to reset the parameter to ALWAYS ON or 2 SECONDS.

3-64