Lexicon RV-8 manual Amplifier Outputs, Video Input Connectors, Analog Audio Input Connectors

Models: RV-8

1 262
Download 262 pages 56.34 Kb
Page 19
Image 19

RV-8

Basic Operation

1 AMPLIFIER OUTPUTS

Provide audio outputs to the speakers. The Center channel output and all Right channel outputs are located on the left-hand side of the rear-panel. All Left channel outputs are located on the right- hand side of the rear-panel. This organizaion facilitates making speaker connections. The amplifier binding posts accommodate the following connectors:

standard 0.75-inch banana plugs

size 10-12 gauge spade connectors

up to 10-gauge bare wire

See page 2-13for additional amplifier information.

2 VIDEO INPUT CONNECTORS

Provide video input in the Main Zone, Zone 2 and Zone 3. Five composite video connectors labeled Video 1 to 5, and five S-Video connectors labeled S-Video 1 to 5 are available.

3 ANALOG AUDIO INPUT CONNECTORS

Provide analog audio input in the Main Zone, Zone 2 and Zone 3. Eight stereo analog audio input connectors labeled Audio 1 to 8 are available. Connectors labeled 3, 4, 5, 6, 7 and 8 can be configured as 5.1-channel connectors.

When a 5.1-channel analog audio source is present in the Main Zone, input signals are sent to the Main Zone audio output connectors as indicated in the following table. When a 5.1-channel analog source is

present in the Main Zone, only the Front (L) and (R) input signals are sent to the Zone 2 and Zone 3 audio output connectors. If the ZONE2 IN parameter is set to DMIX, a downmix of the 5.1 analog source is sent to the Zone 2 audio output connectors. See “ZONE2 in Parameter Settings” on page 3-22for additional information.

Input Connector

Output Connector

 

 

(L)

Front L

 

 

(R)

Front R

 

 

(C)

Center

 

 

(SUB)

Subwoofer

 

 

(LS)

Side L and Rear L

 

 

(RS)

Side R and Rear R

4 COMPONENT VIDEO INPUT CONNECTORS

Three component video input connectors labeled Component Video 1 to 3 are available for use in the Main Zone and have full HDTV compat- ibility. The ultra-wide bandwidth component video switcher accepts any analog component or RGB video input type. The component video connectors are not available for Zone 2 or Zone 3.

5 MAIN ZONE VIDEO OUTPUT CONNECTORS

Provide video output in the Main Zone. Two composite video connectors, two S-Video connectors and one component video connector are available.

2-7

Page 19
Image 19
Lexicon RV-8 manual Amplifier Outputs, Analog Audio Input Connectors, Component Video Input Connectors