Lexicon RV-8 manual Config, Main 5.1 & ZONE2, Main 5.1 & ZONE3

Setup Lexicon

I/O CONFIG (continued)

MAIN MENU

MODE ADJUST AUDIO CONTROLS TUNER PRESETS

SETUP

SETUP

INPUTS

SPEAKERS

I/O CONFIG

DISPLAYS

VOLUME CONTROLS TRIGGER

TUNER SETUP

LOCK OPTIONS LIVE! CALIBRATION POWER MANAGEMENT

I/O CONFIG

ANALOG INPUTS

AMP OUTPUTS

AMP OUTPUTS

MAIN 7.1

MAIN 5.1 & ZONE2 2.0 MAIN 5.1 & ZONE3 2.0

MAIN 7.1

SETUP I/O CONFIG AMP INPUTS MAIN 7.1

When set to MAIN 7.1, all of the amplifier outputs on the rear panel will be configured for use in the Main Zone. Outputs 3 and 7 are used for the rear speakers (Rear L/R).

MAIN 5.1 & ZONE2 2.0

SETUP I/O CONFIG AMP INPUTS MAIN 5.1 & ZONE2 2.0

Configures amplifier outputs 3 and 7 for use in Zone 2. Outputs 1, 2, 4, 5 and 6 will be configured for use in the Main Zone. The input source selected for Zone 2 will be output on amplifier outputs 3 and 7.

Note:

If the current speaker configuration is using rear speakers, a warning message will appear alerting the user to the fact that the rear speakers will be disabled for the Main Zone when the 5.1 MAIN & ZONE2 2.0 setting is chosen. Press the right menu button to confirm the change. Pressing any other button will cancel the change.

MAIN 5.1 & ZONE3 2.0

SETUP I/O CONFIG AMP INPUTS MAIN 5.1 & ZONE3 2.0

Configures amplifier outputs 3 and 7 for use in Zone 3. Outputs 1, 2, 4, 5 and 6 will be configured for use in the Main Zone. The input source selected for Zone 3 will be output on amplifier outputs 3 and 7.

Note:

If the current speaker configuration is using rear speakers, a warning message will appear alerting the user to the fact that the rear speakers will be disabled for the Main Zone when the 5.1 MAIN & ZONE3 2.0 setting is chosen. Press the right menu button to confirm the change. Pressing any other button will cancel the change.

3-62