Lexicon RV-8 manual Input Select Parameter Settings, Digital Analog Auto, For example

RV-8 Setup

INPUT SELECT PARAMETER SETTINGS

DIGITAL	ANALOG	AUTO
The RV-8 sends the assigned digital audio	The RV-8 sends the assigned analog audio input	The RV-8 toggles between sending the assigned
input connector to the Main Zone audio	connector to the Main Zone audio output	digital and analog audio input connectors to the
output connectors. The RV-8 ignores the	connectors. The RV-8 ignores the digital audio	Main Zone audio output connectors, based on the
assigned analog audio input connector.	input connector.	input source that is present.

Note the following:						Note the following:	For example:
• The digital audio input connectors						• The RV-8 automatically sets the INPUT	• When a 2-channel PCM, Dolby Digital or
	are compatible with PCM (44.1, 48,					SELECT parameter to ANALOG when the		DTS(-ES) source is present, the RV-8
	88.2 and 96kHz), Dolby Digital and					DIGITAL IN parameter is set to NONE.		automatically selects the assigned digital
	DTS(-ES) sources.					• The ANALOG IN parameter can be used to		audio input connector.
• The digital audio input connectors
						assign an analog audio input connector	• When an SACDTM source is present, the RV-
	are not compatible with MPEG or					for the selected input.		8 automatically selects the assigned analog
	MP3 sources. If an incompatible							audio input connector.
	digital audio source (e.g., MPEG or
	MP3) is present, the RV-8 automati-						Note the following:
	cally selects the assigned analog
	audio input connector.						• The RV-8 automatically sets the INPUT SELECT
•	The	RV-8	automatically	sets	the			parameter to AUTO when both digital and
								analog audio input connectors are assigned.
	INPUT SELECT parameter to DIGITAL
	when the ANALOG IN parameter is						•	When no compatible digital source is
	set to NONE.							present, the RV-8 automatically selects the
• If ANALOG IN is set to NONE, the								assigned analog audio input connector.
	RV-8 will mute.						•	The AUTO setting is recommended for
•	The	DIGITAL	IN parameter	can	be			components that generate both digital and
								analog input signals, such as DVD/SACD
	used to assign a digital audio input
								players.
	connector for the selected input.

3-19