Lexicon RV-8 manual Recalling the Preprogrammed THREE-DIGIT Number, Erasing Learned Buttons

Appendix C Lexicon

5.To edit DEVICE button text, skip Steps 3 and 4 and press the PAGE button before selecting the Device button.

6.The character to be changed will blink. To change the character use the number pad buttons on the remote control. The characters assigned to each number pad button are shown below. It will cycle to a different character each time the same number pad button is pressed.

Note:

Move the cursor left or right using the joystick. Delete a current character by using the cursor down on the joystick. Using the “cursor down” technique is a quick way to delete all of the text on a label.

1. A B C	2. D E F	3. G H I	4. J K L
5. M N O	6. P Q R	7. S T U	8. V W X
9. Y Z (Blank)	0. + - <>, etc

7.Save the text by pressing the button you were writing on (the same function button selected in step 3 or device button in step 4).

8.Exit from Edit mode by pressing the HOME button and then exit from the SETUP mode by pressing the HOME button again.

4.The character to be changed on the button you selected will blink and you can change the character using the number pad buttons on the remote control. The characters assigned to each number pad button are shown in the previous column. It will cycle to a different character each time the same number pad button is pressed.

5.Save the edited text by pressing the same function button selected in step 4.

6.Exit from Edit mode by pressing the HOME button and then exit from the SETUP mode by pressing the HOME button once again.

RECALLING THE PREPROGRAMMED THREE-DIGIT NUMBER

1.Go to the SETUP mode by pressing the HOME and ENT buttons simultaneously for three seconds.

2.Press the RECAL button next to the LCD screen.

3.The LCD display will alternately flash device names and the three- digit code number assigned to the device for 10 seconds and then exit to the SETUP mode.

4.Before the 10 seconds are up, pressing the HOME button on the remote will stop the flashing and exit to the SETUP mode.

5.Exit from SETUP mode by pressing the HOME button once again.

EDIT TEXT FOR FAVORITE CHANNEL BUTTONS

To edit text for favorite channel buttons:

1.Go to the SETUP mode by pressing the HOME and ENT buttons simultaneously for three seconds.

2.Press the EDIT button next to the LCD screen.

3.Press the FAV button and then the favorite channel button on which you wish to write text. There are five LCD pages of favorite channels. Select the page you wish to write on by pressing the PAGE button.

ERASING LEARNED BUTTONS

To erase learned buttons:

1.Go to the SETUP mode by pressing both the HOME and ENT buttons simultaneously for three seconds.

2.Press the ERASE button next to the LCD screen.

3.Press the LEARN button.

C-14