Lexicon RV-8 manual Performing Manual Speaker Distance Calibration, Setup

Setup Lexicon

PERFORMING MANUAL SPEAKER DISTANCE CALIBRATION

SETUP SPEAKERS MANUAL SPEAKER DISTANCES

Selecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option displays the SPEAKER DISTANCES menu, to manually calibrate speaker distances.

MAIN MENU

MODE ADJUST AUDIO CONTROLS TUNER PRESETS

SETUP

SETUP

INPUTS SPEAKERS I/O CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

TUNER SETUP

LOCK OPTIONS LIVE! CALIBRATION POWER MANAGEMENT

SPEAKER SETUP

SET CROSSOVERS CHECK MICROPHONES AUTOMATIC MANUAL

SET CROSSOVERS BEFORE CALIBRATING

MANUAL SPEAKER SETUP SPEAKER DISTANCES

SPEAKER DISTANCES			FRONT LEFT	0.0ft
LEVELS CALIBRATION			CENTER	0.0ft
			FRONT RIGHT	0.0ft
			SIDE RIGHT	0.0ft
R	SR	RR	REAR RIGHT	0.0ft
0.0ft	0.0ft	0.0ft	REAR LEFT	0.0ft
			SIDE LEFT	0.0ft
C
			SUBWOOFER	0.0ft
0.0ft			UNITS	FEET

	M	L	SL	RL
	SUB
0.0ft		0.0ft	0.0ft	0.0ft

0.0 to 30.0ft or 12.0m

METERS

FEET

To manually calibrate speaker distances:				3. To	determine the appropriate speaker distance, measure the
1. Follow the menu path shown above to select MANUAL SPEAKER				distance between the primary listening position and the front of
				the speaker.
SETUP	SPEAKER DISTANCES. The SPEAKER DISTANCES menu
				For example, when the FRONT LEFT parameter is selected,
shown above will open in the on-screen display.
				measure the distance between the primary listening position
2. Press the	or	arrow buttons to highlight the desired speaker
				and the front of the front left speaker (connected to the Main
distance parameter. Then, press the			arrow button to select the
				Zone audio output connector labeled Front L).
highlighted speaker distance parameter.
				4. When the speaker distance has been measured, press the
				and	arrow buttons to set the parameter to the closest available
				value.

3-54