Black Box LES1116A, LES1332A, LES1408A, LES144BA, LES1416A Set up distributed console servers

Models: LES1116A LES110BA LES1308A LES1348A LES144BA Value-Line and Advanced Console Servers LES114BA LES1432A LES1332A LES1316A LES1416A LES1208A-R2 LES1132A LES1216A-R2 LES1232A LES1248A-R2 LES1408A

1 286
Download 286 pages 6.23 Kb
Page 183
Image 183

10.2.2 Set up distributed console servers

This section provides a brief walkthrough on configuring a single console server to monitor the status of one attached network host (a Windows IIS server running HTTP and HTTPS services) and one serially attached device (the console port of a network router), and to send alerts back to the Nagios server when an Administrator connects to the router or IIS server.

This walkthrough provides an example, but details of the configuration options are described in the next section. This walkthrough also assumes the network host and serial devices are already physically connected to the console server. The first step is to set up the Nagios features on the console server:

Browse the Black Box console server and select System: Nagios on the console server Management Console. Check Nagios service Enabled.

Enter the Host Name and the Nagios Host Address (for example, IP address) that the central Nagios server will use to contact the distributed Black Box console server.

Enter the IP address that the distributed Black Box console server will use to contact the central Nagios server in Nagios Server Address.

Enter the IP address that the clients running SDT Connector will use to connect through the distributed Black Box servers in SDT Gateway address.

Check Prefer NRPE, NRPE Enabled, and NRPE Command Arguments.

Check NSCA Enabled, choose an NSCA Encryption Method and enter and confirm an NSCA Secret. Remember these details because you will need them later on. For NSCA Interval, enter: 5

Click Apply.

Next, you must configure the attached Window network host and specify the services you will be checking with Nagios (HTTP and HTTPS):

Select Network Hosts from the Serial & Network menu and click Add Host.

Enter the IP Address/DNS Name of the network server, for example: 192.168.1.10 and enter a

Description, for example: Windows 2003 IIS Server.

_____________________________________________________________________

724-746-5500 blackbox.com

Page 183

Page 183
Image 183
Black Box LES1116A, LES1332A, LES1408A Set up distributed console servers, Description, for example Windows 2003 IIS Server