Black Box LES114BA, LES1332A, LES1408A SDT Connector to Management Console, Dial in configuration

 Click OK.

6.2.8Dial in configuration

If the client PC is dialing into Local/Console port on the console server, you will need to set up a dial-in

PPPlink:

Configure the console server for dial-in access (following the steps in the Configuring for Dial-In PPP Access section in Chapter 5, Configuring Dial In Access).

Set up the PPP client software at the remote User PC (following the Set up the remote Client section in Chapter 5).

Once you have a dial-in PPP connection established, you then can set up the secure SSH tunnel from the remote Client PC to the console server.

6.3SDT Connector to Management Console

You can also configure SDT Connector for browser access to the console server’s Management Console —and for Telnet or SSH access to the command line. For these connections to the console server itself, you must configure SDT Connector to access the Gateway itself by setting the Gateway (console server) up as a host, and then configuring the appropriate services:

Launch SDT Connector on your PC. Assuming you have already set up the console server as a Gateway in your SDT Connector client (with username/ password etc.), select this newly added Gateway and click the Host icon to create a host. Or, select File -> New Host.

Enter 127.0.0.1 as the Host Address and provide details in Descriptive Name/Notes. Click OK.

_____________________________________________________________________

724-746-5500 blackbox.com Page 113