Note: The SMS command trigger co ndition can only be set if there is an internal or ex t ernal USB cellular
modem detected

7.3 Trigger Actions

To configure the sequence of actions that is to be taken in the ev ent of the trigger condition:
For a nominated Auto-Response - with a defined Ch eck Condit ion - click on Add Trigger
Action (e.g. Send Em ai l or Run Custom Script) to select the action type to be taken. Then
configure the select ed action (as detailed in the following sections)
Each action is co nfigured with a nominated Action Delay Time which specifies how long (in
seconds) after the A uto-Response trigger event to wait before pe rf orming the action. S o you
can add follow-on act ions to create a sequence of actions that will be taken in the event of
the one trigger condi t i on
To edit (or delet e) an existing action, click the Modify (or Delete) icon in the Scheduled
Trigger Action table
Note: A message text can be sent with Email, SMS and Nagios a ct ions. This configurabl e m essage can
include selected v alues:
$AR_TRIGGER_VAL = the trigger value for the ch eck e.g. for UPS St atus, it could be onbatt or
battlow
$AR_VAL = the value returned by the check e.g. for ups stat us, it could be online/onbatt/battlow
$AR_CHECK_DEV = the dev i ce name of the device b ei ng checked e.g. f or A l arm, the alarm
name
$TIMESTAMP = the current timestamp
$HOSTNAME = the hostname of the console server
The default messag e t ext is: $TIMESTAMP: This action was run - Check details: value $AR_VAL
vs trigger value $AR_ TRIGGER_VAL
7.3.1 Send Email
Click on Send Email as the Add Trigger Action. Enter a unique Action Name and set the
Action Delay Time

_____________________________________________________________________

724-746-5500 | blackbox.com Page 140