Click Apply. You have selected the failover method. It is not active until you specify the external
sites to be probed to trigger failover, and set up the failover ports themselves. This is covered in
Chapter 5.
Note You can configure the second Ethernet port as either a gateway port or as an OOB/Failover port,
but not both. Make su re you did not enable the M anagement LAN function on Network 2.
3.6.4 Aggregating the network ports
By default, you can only access the console server's Management LAN network ports using SSH
tunneling/port forwarding or by establishing an IPsec VPN tunnel to the console server. However, all the
wired network ports on the console servers can also aggregated by being bridged or bonded.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 43