Black Box LES1232A SMS via Cellular Modem,  Select Cellular Modem In the SMS Settings field

Select a Secure Connection (if applicable) and specify the SMTP port to be used (if other than the default port 25)

You may also enter a Sender email address which will appear as the “from” address in all email notifications sent from this console server. Some SMS gateway service providers only forward email to SMS when the email has been received from authorized senders. So you may need to assign a specific authorized email address for the console server

You may also enter a Username and Password as some SMS gateway service providers use SMTP servers which require authentication

Similarly you can specify the specific Subject Line that will be sent with the email. Generally the email subject will contain a truncated version of the alert notification message (which is contained in full in the body of the email).

However some SMS gateway service providers require blank subjects or require specific authentication headers to be included in the subject line

Click Apply Settings to activate SMS-SMTP connection.

SMS via Cellular Modem

To use an attached or internal cellular modem for SMS the Administrator must enable SMS:

Select Cellular Modem In the SMS Settings field

Check Receive Messages to enable incoming SMS messages to be received. A custom script will be called on receipt of incoming SMS messages

You may need to enter the phone number of the carrier’s SMS Message Centre (only if advised by your carrier or Support)

Click Apply Settings to activate SMS connection

_____________________________________________________________________

724-746-5500 blackbox.com Page 144