Black Box LES110BA, LES1332A, LES1408A, LES144BA, LES1416A, LES1348A, LES1432A Browser connection

oSubnet mask: 255.255.255.0

If you want to retain your existing IP settings for this network connection, click Advanced and Add the above as a secondary IP connection.

If it is not convenient to change your PC/workstation network address, you can use the ARP-Pingcommand to reset the console server IP address. To do this from a Windows PC:

Click Start -> Run (or select All Programs then Accessories then Run).

Type cmd and click OK to bring up the command line.

Type arp –dto flush the ARP cache.

Type arp –ato view the current ARP cache (this should be empty).

Now add a static entry to the ARP table and ping the console server to assign the IP address to the console server. In the example below, a console server has a MAC Address 00:13:C6:00:02:0F (designated on the label on the bottom of the unit) and we are setting its IP address to 192.168.100.23. Also the PC/workstation issuing the arp command must be on the same network segment as the console server (that is, have an IP address of 192.168.100.xxx)

Type arp -s 192.168.100.23 00-13-C6-00-02-0F (Note for UNIX the syntax is: arp -s 192.168.100.23 00:13:C6:00:02:0F).

Type ping -t 192.18.100.23 to start a continuous ping to the new IP Address.

Turn on the console server and wait for it to configure itself with the new IP address. It will start replying to the ping at this point.

Type arp –dto flush the ARP cache again.

3.1.2Browser connection

Activate your preferred browser on the connected PC/workstation and enter https://192.168.0.1 The Management Console supports all current versions of the popular browsers (Internet Explorer, Mozilla Firefox, Chrome, and more).

_____________________________________________________________________

724-746-5500 blackbox.com Page 27