Olympus WS-821 Noise when monitoring, Recording, Unable to write index, Marks/temp marks, Radio

Troubleshooting

Problem	Possible cause	Solution
		Connecting a speaker with a built-in
		amplifier may cause feedback during
		recording. Using the earphones to monitor
Noise when monitoring	Feedback is being caused.	recording is recommended.
a recording		Adjust the recording setup such as by
		moving the earphones and microphone
		farther apart, or ensuring the microphone
		is not facing the earphones.
	The maximum number of marks	Erase unneeded marks (☞ P.43).
	(99) has been reached.
Unable to write index	The file is locked.	Unlock the file (☞ P.61).
marks/temp marks
	The file is a read-only file.	Unlock the file, or undo the read-only
		setting on a PC.
	WS-823 model only
	The earphones are not connected	The earphones provided also function as
Unable to listen to FM		an antenna. Connect the earphones when
	to the EAR jack.
		listening to the radio.
radio
	[Earphone] has been selected for	To output the sound through the built-in
		speaker, select [Speaker] for [Output]
	[Output].
		(☞ P.81).
	WS-823 and WS-822 models only
		To use the rechargeable battery provided,
	[Alkaline] has been selected for	select [Ni-MH] for [Battery]. Do not use
		the rechargeable battery at higher/lower
	[Battery].
		temperatures than the recommended
Unable to charge the
		range (☞ P.10, P.15, P.77).
battery
	The `OK button was not pressed.	Press the `OK button as directed in
		the confirmation screen shown when
		connecting the USB connector.
	[Composite] has been selected	Select [Storage Class] for [USB Class]
	for [USB Class].	(☞ P.89).
The PC is unable to	[AC Adapter] has been selected	Select [PC] for [USB Connection]
recognize the voice
	for [USB Connection].	(☞ P.89).
recorder.
Button operations are	[Transcription] or [Language	Select [Off] for [Play Scene] (☞ P.45,
	study] has been selected for
abnormal.		P.74).
	[Play Scene].

7

Troubleshooting

EN

103