Olympus WS-822, WS-823, WS-821 Monitoring while recording, Recording settings, MP3 256 kbps

Recording

Monitoring while recording

You can monitor the recording as you are making it by listening on the earphone plugged into the voice recorder’s EAR jack. Use the +/– button to adjust the recording monitor volume.

1Connect the earphones to the voice recorder’s EAR jack.

To EAR

jack

Recording settings

Various recording settings are available, letting you tailor recording to different recording conditions.

[Rec Level]	Sets the recording sensitivity.
(☞ P.63)
[Rec Mode]*1	Sets the recording sound
(☞ P.64)	quality.
[Zoom Mic]*2	Sets the built-in stereo
(☞ P.64)	microphone’s directivity.
[Low Cut Filter]	Reduces humming sounds
	from equipment such as
(☞ P.65)
	air-conditioners or projectors.
[VCVA]	Sets the trigger level for
	voice-activated recording
(☞ P.65)
	(VCVA).
[V-Sync. Rec]	Sets the trigger level for
(☞ P.67)	voice-synchronized recording.
	Used to select one of multiple
	preregistered templates of
	recording settings. When
[Rec Scene]	selected, each template
	enters several settings
(☞ P.32)
	tailored to a particular
	recording location or
	condition all in a single
	operation.

2

Recording

•Changing the volume will not affect the recording level.

NOTE

•To avoid unpleasantly loud sound, set the volume to [00] before plugging in the earphone.

•To prevent feedback, do not place the earphone near the microphone while recording.

*1 When [FM Radio] mode is set, [Rec Mode] is fixed at one of the settings below (WS-823 model only).

•[MP3 256 kbps]

•[MP3 128 kbps] *2 WS-823 model only

EN

29