Olympus WS-823, WS-821 Press the 9or 0button to adjust the voice activation level, Sync. Rec P.67

Recording menu [Rec Menu]

5

Recording menu [Rec Menu]

EN

Adjusting the voice activation level for voice-activated recording

1Press the REC (s) button to start recording.

•Recording pauses automatically about 1 second after the input sound becomes quieter than the set activation sensitivity.

The blinking message [Standby] appears in the display. The LED indicator light becomes lit when recording is activated and flashes when recording is paused.

2Press the 9or 0button to adjust the voice activation level.

a

b

aVoice activation level (moves left/ right to match set level)

bLevel meter (changes in proportion to recording sound volume)

•The setting can be adjusted to between [01] and [23].

TIP

•Increasing the setting number increases the VCVA activation sensitivity, enabling quieter sounds to activate the start of recording.

•Adjust the VCVA voice activation level to suit the recording conditions (to cope with high levels of surrounding noise or the like).

•To avoid recording mistake, it’s recommended to perform a test recording beforehand to adjust the voice activation level.

WS-823 model only:

•To change the recording level

(☞ P.63) during VCVA recording in [Manual], press the F1 button. The voice recorder changes to recording level adjustment mode. Press the

F1 button again to return to voice activation level adjustment mode.

NOTE

•The following function is disabled when using the [VCVA] function:

•[V-Sync. Rec] (☞ P.67)

66