Note The SDT Connector client can be configured with unlimited number of Gateways (that is, console
servers). You can configure each Gateway t o port forward to an unli mi ted number of locally
networked Hosts. Th ere is no limit on the number of SDT Connector clients that can be
configured to acce ss t he one Gateway. Nor are t here limits on the number of Host connections
that an SDT Connector client can concurr ently have open through the one Gateway t unnel .
There is a limit on the number of SDT Connector SSH tunnels tha t can be open at the same ti m e
on a particular Gate way (console server). Each Gateway (con sole serve r) can support at least 50
such concurrent connections. At any time, you could have up to 50 users securely controlling an
unlimited number of Managed Devices at a remote site through the on-site console ser ve r
Gateway.
6.2.5 Manually adding hosts to the SDT Connector gateway
For each gateway, you can manually specify the network connected hosts that you will access through
that console server; and for each host, specify the services that you will use to communicate with the
host.
Select the newly added gateway and click the Host icon to create a host that will be
accessible via this gateway. (Alternatively select File: New Host).
Enter the IP or DNS Host Address of the host (if this is a DNS address, it must be able to be
resolved by the gateway).
Select which Services to use to access the new host. A range of service options are pre-
configured in the default SDT Connector client (RDP, VNC, HTTP, HTTPS, Dell RAC, VMware, etc.).
However if you want to add new services to the range, then proceed to the next section (Adding
a new service) then return here.
Or, enter a Descriptive Name for the host to display instead of the IP or DNS address, and any
Notes or a Description of this host (such as its operating system/release, or anything special
about its configuration).
Click OK.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 108