Black Box LES1208A-R2, LES1332A Adding a client program to be started for the new service

Note SDT Connector can also tunnel UDP services. SDT Connector tunnels the UDP traffic through the TCP SSH redirection, so it is a “tunnel within a tunnel.”

Enter the UDP port where the service is running on the host. This will also be the local UDP port that SDT Connector binds as the local endpoint of the tunnel.

Note that for UDP services, you still need to specify a TCP port under General. This will be an arbitrary TCP port that is not in use on the gateway. An example of this is the SOL Proxy service. It redirects local UDP port 623 to remote UDP port 623 over the arbitrary TCP port 6667.

6.2.7Adding a client program to be started for the new service

Clients are local applications that you may launch when a related service is clicked. To add to the pool of client programs:

Select Edit: Preferences and click the Client tab. Click Add.

_____________________________________________________________________

724-746-5500 blackbox.com Page 111