Black Box LES1248A-R2, LES1332A Aauthtype, Cciphersuite, Iinterface, Lprivlvl, Ooemtype, Pport

-A<authtype>

Specify an authentication type to use during IPMIv1.5 lan session activation. Supported types are NONE, PASSWORD, MD5, or OEM.

-cPresent output in CSV (comma separated variable) format. This is not available with all commands.

-C<ciphersuite>

The remote server authentication, integrity, and encryption algorithms to use for IPMIv2 lanplus connections. See table 22-19 in the IPMIv2 specification. The default is 3 which specifies RAKP- HMAC-SHA1 authentication, HMAC-SHA1-96 integrity, and AES-CBC-128 encryption algorightms.

-EThe remote server password is specified by the environment variable IPMI_PASSWORD. -f<password_file>

Specifies a file containing the remote server password. If this option is absent, or if password_file is empty, the password will default to NULL.

-hGet basic usage help from the command line. -H<address>

Remote server address, can be IP address or hostname. This option is required for lan and lanplus interfaces.

-I<interface>

Selects IPMI interface to use. Supported interfaces that are compiled in are visible in the usage help output.

-L<privlvl>

Force session privilege level. Can be CALLBACK, USER, OPERATOR, ADMIN. Default is ADMIN. -m<local_address>

Set the local IPMB address. The default is 0x20 and there should be no need to change it for normal operation.

-o<oemtype>

Select OEM type to support. This usually involves minor hacks in place in the code to work around quirks in various BMCs from various manufacturers. Use -o list to see a list of current supported OEM types.

-p<port>

Remote server UDP port to connect to. Default is 623. -P<password>

Remote server password is specified on the command line. If supported it will be obscured in the process list. Note! Specifying the password as a command line option is not recommended.

-t<target_address>

Bridge IPMI requests to the remote target address. -U<username>

Remote server username, default is NULL user.

-vIncrease verbose output level. This option may be specified multiple times to increase the level of debug output. If given three times you will get hexdumps of all incoming and outgoing packets.

-VDisplay version information.

If no password method is specified, then ipmitool will prompt the user for a password. If no password is entered at the prompt, the remote server password will default to NULL.

SECURITY

_____________________________________________________________________

724-746-5500 blackbox.com Page 267