Black Box LES1116A, LES1332A, LES1408A, LES144BA, LES1416A, LES1348A Console server mode, Device Mode

Console server mode

The command to set the port in portmanager mode:

#config -s config.ports.port5.mode=portmanager To set the following optional config elements for this mode:

Data accumulation period	100 ms
Escape character	% (default is ~)
log level	2 (default is 0)
Shell power command menu	Enabled
RFC2217 access	Enabled
Limit pot to 1 connection	Enabled
SSH access	Enabled
TCP access	Enabled
telnet access	Disabled
Unauthorized telnet access	Disabled

#config -s config.ports.port5.delay=100

#config -s config.ports.port5.escapechar=%

#config -s config.ports.port5.loglevel=2

#config -s config.ports.port5.powermenu=on

#config -s config.ports.port5.rfc2217=on

#config -s config.ports.port5.singleconn=on

#config -s config.ports.port5.ssh=on

#config -s config.ports.port5.tcp=on

#config -d config.ports.port5.telnet

#config -d config.ports.port5.unauthtel

Device Mode

For a device mode port, set the port type to ups, rpc, or enviro:

#config -s config.ports.port5.device.type=[ups rpc enviro] For port 5 as a UPS port:

#config -s config.ports.port5.mode=reserved

For port 5 as an RPC port:

#config -s config.ports.port5.mode=powerman For port 5 as an Environmental port:

#config -s config.ports.port5.mode=reserved

SDT mode

To enable access over SSH to a host connected to serial port 5:

#config -s config.ports.port5.mode=sdt

#config -s config.ports.port5.sdt.ssh=on

To configure a username and password when accessing this port with Username = user1 and Password = secret:

#config -s config.ports.port#.sdt.username=user1

#config -s config.ports.port#.sdt.password=secret

_____________________________________________________________________

724-746-5500 blackbox.com Page 217