Black Box LES1216A-R2, LES1332A Importing and exporting preferences, Pon networkconnection

where network_connection is the name of the network connection as displayed in Control Panel -> Network Connections, login is the dial-in username, and password is the dial-in password for the connection.

To initiate a pre-configured dial-up connection under Linux, use the following Start Command:

pon network_connection

where network_connection is the name of the connection.

Enter the command or path to a script to stop the OoB connection in Stop Command.

To stop a pre-configured dial-up connection under Windows, use the following Stop Command:

cmd /c start "Stopping Out of Band Connection" /wait /min rasdial network_connection /disconnect

where network connection is the name of the network connection as displayed in Control Panel -> Network Connections.

To stop a pre-configured dial-up connection under Linux, use the following Stop Command: poff network_connection

To make the OoB connection using SDT Connector:

Select the console server and click Out Of Band. The status bar will change color to indicate that this console server is now accessed using the OoB link rather than the primary link.

When you connect to a service on a host behind the console server, or to the console server itself, SDT Connector will initiate the OoB connection using the provided Start Command. The OoB connection does not stop (using the provided Stop Command) until you click off Out Of Band under Gateway Actions; then the status bar will return to its normal color.

6.6Importing (and exporting) preferences

_____________________________________________________________________

724-746-5500 blackbox.com Page 117