Black Box LES1432A, LES1332A, LES1408A, LES144BA, LES1416A, LES1348A, LES1316A, LES1308A Send SMS

Specify the Recipient Email Address to send this email to and the Subject of the email. For multiple recipients you can enter comma separated addresses

 Edit the Email Text message to send and click Save New Action

Note An SMS alert can also be sent via an SMTP (email) gateway. You will need to specify the Recipient Email Address in the format specified by the gateway provider (e.g. for T-Mobile it is

phonenumber @tmomail.net)

7.3.2Send SMS

Click on Send SMS as the Add Trigger Action. Enter a unique Action Name and set the

Action Delay Time

Specify the Phone number that the SMS will be sent to in international format (without the +)

Edit the Message Text to send and click Save New Action

Note: The SMS alert can only be sent if there is an internal or external USB cellular modem attached. However an SMS alert can also be sent via a SMTP SMS gateway as described above.

7.3.3Perform RPC Action

Click on Perform RPC Action as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time

Select a power Outlet and specify the Action to be performed (power On, OFF or Cycle)

Click Save New Action

7.3.4Run Custom Script

Click on Run Custom Script as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time

Create a script file to execute when this action is triggered and enter the Script Executable file name e.g. /etc/config/action.sh

Set the Script Timeout (i.e. the maximum run-time for the script). Leave as 0 for unlimited.

Enter any Arguments that are to be passed to the script and click Save New Action

7.3.5Send SNMP Trap

Click on Send SNMP Trap as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time

Note: The SNMP Trap actions are valid for Serial, Environmental, UPS and Cellular data triggers only

7.3.6Send Nagios Event

Click on Send Nagios Event as the Add Trigger Action. Enter a unique Action Name and set the Action Delay Time

Edit the Nagios Event Message text to display on the Nagios status screen for the service

Specify the Nagios Event State (OK, Warning, Critical or Unknown) to return to Nagios for this service

_____________________________________________________________________

724-746-5500 blackbox.com Page 141