Black Box LES1332A, LES1408A, LES144BA, LES1416A, LES1348A, LES1432A # config -a, # config -r auth

Attention: The rmuser script is a generic script to remove any config element from config.xml correctly. However, any dependencies or references to this group will not be affected. Only the group details are deleted. The Administrator is responsible for going through config.xml and removing group dependencies and references manually, specifically if the group had access to a host or RPC device.

The following command will synchronize the live system with the new configuration:

# config -a

14.5Authentication

To change the type of authentication for the console server:

# config -s config.auth.type='authtype'

'authtype' can be: Local LocalTACACS

TACACS TACACSLocal TACACSDownLocal LocalRADIUS

RADIUS RADIUSLocal RADIUSDownLocal LocalLDAP

LDAP LDAPLocal LDAPDownLocal

To configure TACACS authentication:

#config -s config.auth.tacacs.auth_server='comma separated list' (list of remote authentiction and authorization servers.)

# config -s config.auth.tacacs.acct_server='comma separated list' (list of remote accounting servers. If unset, Authentication and Authorization Server Address will be used.)

#config -s config.auth.tacacs.password='password' To configure RADIUS authentication:

#config -s config.auth.radius.auth_server='comma separated list' (list of remote authentiction and authorization servers.)

# config -s config.auth.radius.acct_server='comma separated list' (list of remote accounting servers. If unset, Authentication and Authorization Server Address will be used.)

#config -s config.auth.radius.password='password' To configure LDAP authentication:

#config -s config.auth.ldap.server='comma separated list' (list of remote servers.)

# config -s config.auth.ldap.basedn='name'	(The distinguished name of the search base. For
example: dc=my-company,dc=com)
# config -s config.auth.ldap.binddn='name'	(The distinguished name to bind to the server with.

The default is to bind anonymously.)

# config -s config.auth.radius.password='password'

The following command will synchronize the live system with the new configuration:

# config -r auth

_____________________________________________________________________

724-746-5500 blackbox.com Page 221