Black Box LES1432A, LES1332A, LES1408A, LES144BA, LES1416A, LES1348A, LES1316A, LES1308A Environmental

Logging	Enabled
Log interval	600 second
Number of power outlets	4 (depends on the type/model of the RPC)

#config -s config.ports.port2.power.type=APC 7900

#config -s config.ports.port2.power.name=MyRPC

#config -s "config.ports.port2.power.description=RPC in room 5"

#config -s config.ports.port2.power.username=rpclogin

#config -s config.ports.port2.power.password=secret

#config -s config.ports.port2.power.snmp.community=v1

#config -s config.ports.port2.power.log.enabled=on

#config -s config.ports.port2.power.log.interval=600

#config -s config.ports.port2.power.outlets=4

The following five commands are used by the Management Console to add the RPC to “Managed Devices”:

#config -s config.devices.device3.connections.connection1.name=myRPC

#config -s "config.devices.device3.connections.connection1.type=RPC Unit"

#config -s config.devices.device3.name=myRPC

#config -s "config.devices.device3.description=RPC in room 5"

#config -s config.devices.total=3

The following command will synchronize the live system with the new configuration:

# config -a

14.11Environmental

To configure an environmental monitor with the following details:

Monitor name	Envi4
Monitor Description	Monitor in room 5
Temperature offset	2
Humidity offset	5
Enable alarm 1 ?	yes
Alarm 1 label	door alarm
Enable alarm 2 ?	yes
Alarm 2 label	window alarm
Logging enabled ?	yes
Log interval	120 seconds

#config -s config.ports.port3.enviro.name=Envi4

#config -s "config.ports.port3.enviro.description=Monitor in room 5"

#config -s config.ports.port3.enviro.offsets.temp=2

#config -s config.ports.port3.enviro.offsets.humid=5

#config -s config.ports.port3.enviro.alarms.alarm1.alarmstate=on

#config -s config.ports.port3.enviro.alarms.alarm1.label=door alarm

#config -s config.ports.port3.enviro.alarms.alarm2.alarmstate=on

#config -s config.ports.port3.enviro.alarms.alarm2.label=window alarm

#config -s config.ports.port3.enviro.alarms.total=2

#config -s config.ports.port3.enviro.log.enabled=on

#config -s config.ports.port3.enviro.log.interval=120

Assign alarms.total=2 even if they are off.

The following 5 commands will add the environmental monitor to “Managed devices”:

_____________________________________________________________________

724-746-5500 blackbox.com Page 226