for 15 seconds, then plug in the power adapter and re-install the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.

•Other electronic products might prevent your handset and telephone base from communicating with each other. Install your telephone base as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless telephones.

An envelope icon shows on the display or the VOICEMAIL light is flashing and I don’t know why.

•If <envelope icon> appears on the display or the VOICEMAIL light flashes, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail.

Common cures for electronic equipment.

If the telephone is not responding normally, put the cordless handset in the telephone base. If it does not respond, try the following (in the order listed):

•Disconnect the power to the telephone base.

•Disconnect the battery on the cordless handset.

•Wait a few minutes before connecting power to the telephone base.

•Re-install the battery and place the cordless handset in the telephone base or charger.

•Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute for this to take place.

InfoAdditional40

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not use this product near water.

5.Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

6.Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided.

7.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company.

8.Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.

9.Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.

10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.

11. Do not overload wall outlets and extension cords.

12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:

•When the power supply cord or plug is damaged or frayed.

•If liquid has been spilled onto the product.

•If the product has been exposed to rain or water.

41

Additional Info

Page 20 Page 22
Page 21
Image 21
Radio Shack 43-325, 43-326 manual Important Safety Instructions, Common cures for electronic equipment
Page 20 Page 22

43-325, 43-326 specifications

Radio Shack has long been a renowned name in the electronics retail sector, known for providing consumers with innovative products for a range of applications. Among its line of accessories, the Radio Shack 43-326 and 43-325 are two notable products that have garnered attention for their unique features and capabilities.

The Radio Shack 43-326, commonly known as the "Electronic Learning Aid," is tailored for educational purposes, providing users with an interactive platform to explore basic electronic principles. The unit is designed with an intuitive interface that enables users, especially students and hobbyists, to engage with the fundamental concepts of electronics through hands-on experiments.

One of its standout characteristics is its built-in LED indicator, which provides visual feedback during operation, allowing users to easily comprehend the functionality of various electronic components. The device supports multiple projects and comes with a detailed guide, making it easier for users to understand and assemble different circuits. Additionally, the versatile design allows for easy connectivity with various components, making it an excellent tool for learning and experimentation.

Conversely, the Radio Shack 43-325 is designed primarily for hobbyists seeking to build their own circuits or enhance existing ones. This model provides a robust array of components, including resistors, capacitors, and transistors, enabling users to tackle more complex projects than those typically addressed by the 43-326. The 43-325 serves as a comprehensive toolkit, complete with a breadboard that facilitates rapid prototyping.

One remarkable feature of the Radio Shack 43-325 is its comprehensive instructional manual, which details a wide range of project ideas and assists users in developing their skills progressively. Both products are designed with a focus on durability and ease of use, ensuring that users can confidently explore the world of electronics without the fear of damaging components.

In summary, the Radio Shack 43-326 and 43-325 serve unique roles in the electronics hobbyist community, with the former catering to educational needs and the latter focusing on advanced project development. Together, these products exemplify Radio Shack's commitment to fostering a deep understanding of electronics, ensuring that users receive both practical experience and theoretical knowledge.
Top Page Image Contents