Radio Shack 43-3537 owner manual 52&&+#.+0, #..4+&124#6+10, DkcXhýIjehZ appears

±"016'"±"

The memory location used by the phone to store a speed dial number is separate from those used to store names and numbers.

&+#.+0)"#"/'/14;"07/$'4

To dial a number stored in memory, lift the handset and press MEM. The list of memory location numbers appears. Choose a memory location ('–&) by pressing a number or by repeatedly pressing 8 or 9, then press TALK.

You can also dial a memory number after pressing TALK. Press MEM (the display does not change but the phone’s memory recall activates), then press the desired memory location number.

%*#+0/&+#.+0)"5'48+%'" 07/$'45

For quick recall of numbers for special services (such as bank-by-phone), store each group of numbers in its own memory location.

Dial the service’s main number first. Then, at the appropriate place in the call, press MEM and enter the number for the location where the additional information is stored.

6'56+0)"5614'&"'/'4)'0%;"

07/$'45

If you store an emergency service’s number (police department, fire department, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to explain the reason for your call.

52''&"&+#.+0)

You can store one number you dial often in the phone’s speed dial memory. Speed dial lets you dial a number by pressing a single button. ±

5614+0)"#"07/$'4"+0"52''&" &+#.

1.Lift the handset.

2.Hold down SPEED DIAL until Ijeh[ý DkcX[h appears.

3.Follow the steps under “Storing a Number and Name in Memory” on Page 7 to store a number.

4.Press SEL. The phone beeps and

DkcX[hýIjeh[Z appears.

&+#.+0)"6*'"52''&"&+#." 07/$'4

Simply press SPEED DIAL to dial the stored speed dial number. You do not have to press

TALK.

'&+6+0)"6*'"52''&"&+#." 07/$'4

1.Lift the handset.

2.Hold down SPEED DIAL until the speed dial menu appears.

3.Press 9#to choose ;Z_jýDkcX[h, then press SEL.

4.To edit the number, repeatedly press DEL/CH to erase up to the correct entry, enter the correct number, then press

SEL.

&'.'6+0)"6*'"52''&"&+#." 07/$'4

1.Lift the handset.

2.Hold down SPEED DIAL until the speed dial menu appears.

3.Press 9#to choose :[b[j[ýDkcX[h, then press SEL.

4.Press 8#to move the cursor to O[i, then

press SEL or DEL/CH. The phone beeps once and DkcX[hý:[b[j[Z appears.

%#..'4"+&"12'4#6+10

If you subscribe to Caller ID service from your phone company, the phone company sends information about the call, as well as the time and date, between the first and second rings of every call you receive. The phone displays this information after the second ring, and it stores up to 30 Caller ID records for later review. It also shows if the caller information is unavailable or if the name and number were blocked by the caller (see “Caller ID Messages” on Page 9).

If you subscribe to Call Waiting with Caller ID, you hear a tone through the handset when a call comes in, then the Caller ID record appears. If the Caller ID memory becomes full, any new call replaces the oldest call’s record.

+/2146#06"%#..'4"+&" +0(14/#6+10

To use the phone’s Caller ID and Caller ID with Call Waiting features, you must be in an area where those services are available and you must subscribe to those services through your local phone company.

Where Caller ID is offered, one or more options are generally available:

•caller’s number only

•caller’s name only

•caller’s name and number

8