Additional Information
32
ADDITIONALINFORMATION

INSTALLING THE BELTCLIP

To attach the beltclip

Insert the beltclip into the holes on each
side of the handset. Press down until it
clicks.

To remove the beltclip

Pull both sides of the beltclip to release the
tabs from the holes.

HEADSET INSTALLATION

You can connect an optional headset with a
3/32-inch (2.5-mm) plug. Contact
RadioShack for a suitable headset.
To connect the headset, open the rubber
cover on the side of the handset. Then
insert the headset’s plug into the jack.Ô
When you finish using the headset,
disconnect it from the handset and close the
rubber cover to protect the jack.
Ô NOTES Ô
If you place the handset
on the base to recharge
it while the headset is
connected, be sure the
handset seats properly.
You can use a handset
holder (available from
your local RadioShack
store) to hang the
handset on your belt for
greater convenience
when using a headset.
43-3549.fm Page 32 Tuesday, May 25, 2004 2:15 PM