3.Press MEM or SELECT.
4.Press MEM or SELECT. The ¨Store Name¨ screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If “Edit Memory X X” appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.
5.To enter a name (up to 13 characters), use the number keys.
•See “Steps for Entering Names and Special Characters” on page 20.
•Use #/> and 
/TONE/< to move the cursor to the desired location.
•Use DELETE/CH to delete characters as needed.
•Press and hold DELETE/CH to delete all the characters.
•If a name is not required, go to step 6.
6.Press MEM or SELECT. ¨Store Number¨ is displayed.
The cursor flashes indicating that the display is ready for the number to be entered.
7.Use the number keys to enter the phone number.
•The phone number cannot exceed 20 digits.
Memory Dialing
19
