Radio Shack 43-3549 owner manual CONNECTING/CHARGING the Battery Pack

4.Plug the adapter into a standard AC outlet. And plug the modular cord’s other end into a modular phone line jack.

5.For a wall plate,

align the base’s keyhole slots with the wall plate studs and slide the base downward to

secure it.	DC IN 9V TEL LINE
For direct wall
mounting, align
the base’s
keyhole slots
with the
mounting
screws and slide
the base
downward to secure it.

CONNECTING/CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel-cadmium battery pack in the handset, but not connected. Before using your phone, you must connect the battery pack. Then charge it for about 15–20 hours. !

1.Press down and slide off the battery compartment cover.

2.Lift the battery pack out of the compartment.

3.Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Then place the battery pack in the compartment.

! IMPORTANT !

The EPA certified RBRC® Battery Recycling Seal on the nickel- cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1- 800-843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

Installation

9